SODABOX is born from the love for this fantastic world made of water and a passion for “rebreathers”.
A solution that provides to all the fans of this system an exclusive product, for protection and safety of the “filter” and of the “soda lime”.
Sodabox, thanks to its applicative function, allows to protect the “filter” from bumps, shocks, accidental falls and to keep the “soda lime” under a state of “vacuum”, avoiding exposure to the action of “external gases” (smoke, air pollution etc.), as well as to avoid sudden changes of relative humidity, before and after diving.
“Sodabox”, the container for the rebreather “filters” is made out of a Plexiglas cilynder with a thickness of 5 mm. (diameters and heights are realized according to the size of the filter to be contained).
The bottom of the container in Plexiglas has a thickness of 15 mm, in which the internal part has been obtained from the “negative” of the base of the filter of the rebreather, so that it fits perfectly and will facilitate its blocking once positioned inside.
On the top part of the container a covering has been realized in Plexiglas with a thickness of 15 mm where a “cavity” has been obtained, in which a gasket is inserted (o-ring), that has a sealing function of the vacuum in the inside of the container.
Furthemore, on the superior part of the covering, a “ball-valve” is inserted, having the function of “closing and opening” in order to maintain the inside of the container under a state of vacuum.
Sodabox comes with a “vacuum pump”, which is applied and removed after its use thanks to a quick-release coupling.
The vacuum pump, by use of the “Venturi effect”, eliminates completely any form of gas (air, humidity, etc.) which is present inside of the container.
This process, which takes place in a few seconds, is done using a simple “low pressure hose” (BCD type), and using any type of mix available (air, argon, nitrox, etc.).
Sodabox is completely coated with a handy cover of neoprene 3 mm, customizable (on request) and has a nylon handle which facilitates transport.
Such covering, in addition to having a protective function in case of collision, also has insulation properties (cold/hot) and protection from external light sources like sun etc, for a better and complete preservation of the soda lime.
SODABOX is a product completely “Made in Italy”, patented and entirely realized with machinery to numerical control (CNC).
No customer comments for the moment.