Stealth 2.0 BC xDEEP®
Stealth 2.0 BC xDEEP®
Warning: Last items in stock!
Place the BC where needed The Stealth 2.0 BC is independent from the Stealth 2.0 harness and mounted with the use of 5-point system which makes it possible to place the BC where it is needed.
The buoyancy compensator can be moved around your body during the dive, when you dismount the cylinders and the change of position is necessary to maintain the ideal trim.
Moreover, the Stealth 2.0 BC can be used without any problems with various harnesses of other producers!
Durable double-layer construction
Do you use a single-shell wing with your twinset? We don’t do it either. Frankly speaking, we cannot imagine a single-shell wing for wreck diving.
In the side mount configuration, the wing is exposed to damage even more than in standard configuration with the cylinder on the back. So why would you use a single-shell wing?
The stealth 2.0 buoyancy compensator has a double-shell structure with the outer shell made of very strong Cordura® 1100 dTEX.
Anatomical and super-flat
The side mount BC must be flat even when inflated. Why? It is obvious: BC which sticks out poses significant risk of getting caught in something.
Having that in mind, we designed a structure which remains streamlined regardless of how full the BC is and at the same time it is incredibly comfortable.
The inner shell of STEALTH 2.0 BC was made in such a way that its thickness near the spine is minimal, even when fully inflated.
OPRV valve accessible for both left and right hand
When you use the side mount system in wreck or cave diving, you can find yourself in a place where you can reach the valve with only one hand.
Which one? We don’t know that.
Therefore, the over-pressure relief valve in the STEALTH 2.0 wing was placed in the centre making it easy to reach the valve with your right or left hand.
Comfort while surfaced
While remaining surfaced, in high wave environment, many side mount buoyancy compensators tend to move upwards, which definitely reduces your comfort.
The Stealth 2.0 BC has an extra mounting element in the bottom part which is designed to stabilize it while the diver is surfaced or jumps into the water.
This solution provides continuously high position when the diver is surfaced and makes jumps into the water safe for the diver.
No customer comments for the moment.